With a 4 x 6 ft bale size and configurable for hay, silage, rotor feeder and rotor cutter, the RB465's low profile design lets the pickup float over ground contours, gently gathering crop and saving nutrient-packed leaves.
All new heavy-duty pickup reel with stronger tines and full-height pickup dividers
Five-Bar reel with a total of 160 tines for consistent feeding and a clean sweep of crop
Front-loading wrap system provides a short path for optimum wrapping quality
Simpfied net wrap and twine delivery system requires fewer adjustments
Large twine capacity: six active balls, storage for four additional
Premium laced belts or endless belts, built to higher specifications for tear and puncture resistance
Sleek design including high-gloss molded side shields which lift for easy service access
Round Balers For whatever you're baling from wet silage to dry hay to straw or stalks, we have the baler for your operation.
Bale Wet or Dry Crops
From wet silage to dry hay and stalks, the new Case IH RB565 Premium HD round baler gives you the flexibility to bale more crops. It builds on the robust design, larger platform, and improved bale-rejection system of the RB565 family with the addition of a higher torque load on the clutch cutout, a larger main gearbox with heavier output shaft and larger chains and sprockets. In short production windows, you'll have the power to bale more - even at higher moisture levels.
This system controls the tractor stop, bale wrap and bale eject functions without any operator input required. Paired with a Puma® or Maxxum tractor, featuring a CVXDrive™ continuously variable, PowerDrive powershift or ActiveDrive 8 dual-clutch transmission, operators can take advantage of ISOBUS Class 3 controls to automatically stop the tractor when the target bale size is reached. After that, net wrap is automatically applied and, when the wrap cycle is complete, the baler tailgate raises and lowers automatically to eject each wrapped bale. Once the completed bale is ejected, the operator can simply move the tractor shuttle lever to the forward position and go.
All RB5 balers may be equipped with in-cab density. This allows the operator to be able to control density from the monitor, either Deluxe or Pro 700 (shown). With dual zone control, the inner (core) density may be set independently from the outer density. Increase the outer density when storing bales outside for improved weatherability.
On-Board Moisture Sensor
The Moisture Sensor option displays bale moisture on the monitor as the bale is formed and provide the final average moisture for the completed bale.
It is a fully-integrated system that works with the balers electronics and monitor, no need for a separate display
Available with either Deluxe (shown) or Pro 700 monitor
The moisture system is able to measure bale moisture from 7% to 60%, providing a wide range for both dry and wet crops, including hay, straw, silage, and corn stalks
It is simple to use. If desired, the operator can set a high and low moisture level warning, otherwise no adjustment needed
Offered as both a factory installed option or a dealer-installed kit for balers made after February 2019
Available in Hay and Silage models, the rotating feed rotor provides smooth, uninterrupted crop flow. As the crop comes off the pickup, the tines of the large diameter rotor engage the crop and keep it moving over the top of the feeder (overshot) and into the chamber.
The “W” pattern of the tines and large 14” diameter provide high capacity baling in a diverse range of crops and conditions.
Reduce Waste to Improve Profitability
University studies have shown that feeding bales that have been processed significantly reduces waste. By packing smaller pieces of forage, the baler can create incredibly dense bales containing less oxygen which is very beneficial to the fermentation process. The smaller forage length reduces the amount of feed that drops from the animal’s mouth while eating. Feed that is dropped typically gets stepped on and goes uneaten.
Reduce Waste to Improve Profitability
A large diameter rotor, paired with a hydraulically operated drop floor, combine to give you high capacity in even the most difficult crops. The undershot rotor is designed for aggressive feeding. If a rotor plug does occur, the drop floor allows you to easily and quickly clear the plug from the comfort of the cab.
The chopping system available in RB455 and RB465 rotor-cutter models processes the crop to build extra bale density. The 15-blade chopping system works to reduce feed particle length to maximize feed quality. Rotor-cutter balers are the ideal balers for baleage operations and baling high moisture crops.